Boat Detailing Packages
Your Boat Detailers
Included in all packages:
Thorough hand wash cleaning the interior, exterior, and compartments
Engine bay, bilge compartment, and cleaning all metals with a metal polish; to remove most rust and restore shine.
#1
Quick Service Package
This is your detailing service for a quick clean up and shine.
Wash with 2-in-1 Compound and Polymer (Revolution)
This includes a one step 2-in-1 polymer and compound that is only applied on flat fiberglass surfaces. It is applied with an orbital polisher which combines a basic wash and interior clean. This service also includes a wipe down of all metals, glass/isinglass/plexiglass with our marine glass cleaner. As well as a spray, wipedown, and vacuum of compartments, bilge, gas tank and engine.
# 2
Two Step Package
This is your comprehensive “full detail” cleaning and protective coating.
Wash and Heavy Cut Compound with 2-in-1 Compound & Polymer (Level R, & Revolution)
This includes a heavy cut compound applied by a rotary buffer. Followed by a separate polymer coating which is applied by an orbital polisher. This will last several months if correctly maintained and will provide a more durable protection against anything along the lines of fish blood, bird droppings, salt, dirt, or tough leaf staining only on flat fiberglass surfaces of the boat. This service also includes everything as stated above in the “Quick Service Detail” but with much more attention to detail!
# 3
Three Step Package
This is your comprehensive “full detail” cleaning and protective coating with additional attention to detail on your gelcoat.
Wash with Heavy Cut Compound, Medium Cut Polish and Polymer (Level R, Elevate, and Hyper Hold Pro)
This uses a superior SiO2 substitution called Hyper Hold Pro. Polymer in a purer form is applied to all surfaces such as metals, glass, nonskid, fiberglass, vinyl, etc. This service breaks up the 2 in 1 product (Revolution compound/polymer) used in the #2 and #1 service into separate steps. By doing this, your vessel has significantly increased gloss shine, durability and consistency.
# 4
Four Step Package
This is your comprehensive “full detail” cleaning and protective coating that involves extreme attention to detail specifically on gelcoat.
Wash with Heavy Cut Compound, Medium Cut Polish, Finishing Cut Polish, and Polymer (Level R, Elevate, Ignition, and Hyper Hold Pro)
This service gets down to the nitty-gritty. The same services from the number three are included and this service with an additional top of the line finishing cut polish (Ignition Professional Finishing Polish). Boats that are brand new won’t look as good as a boat that is a couple years old that just received our #4 Four Step Detail.
# 5
Five Step Package
This is your comprehensive “full detail” cleaning that involves extreme attention to detail on all surfaces and the ultimate protection on your gelcoat.
Wash with Heavy Cut Compound, Medium Cut Polish, Finishing Cut Polish, Ceramic Prep Polish, and Pro Ceramic Coating (Level R, Elevate, Ignition, Triple P, and Pro Marine Ceramic Coating)
This is a Pro-Nano Bond Ceramic that contains 65-70% of the active silica-based ingredient called silsesquioxane. The higher concentration of Silsesquioxane creates a diamond-hard 9H finish which can protect the boat across multiple seasons depending on location, use and maintenance of the vessel. 9H refers to the hardness level of the ceramic and is a permanent nano ceramic coating that features a high gloss finish that is unmatched in its super-hydrophobic qualities.This entire application process varies from a few days to up to a week+ depending on the size of the vessel. This is a five step process of ceramic application. Which includes the preliminary wash followed by the rotary and orbital buffer (using cutting and polishing agents) to remove any gel coat imperfections. Diluted isopropyl alcohol is then applied to the surfaces after the polishing prep process to remove any old coatings, oils or other contaminants. A world class ceramic prep called Triple P is applied to the surface. Triple P leaves a ceramic resin on the surface to ensure a durable bond for the SiO2 ceramic coating. There are two bottles used for the Pro Ceramic Coating process. Bottle A which contains the primer that fills in any microscopic scratches, cracks, crevices and bottle B which contains the solvent.
# 6
Black Dog Signature Package
This is our Signature Marine Package. This is your comprehensive “full detail“ cleaning that involves extreme attention to detail and the ultimate protection on all surfaces.
Wash with Heavy Cut Compound, Medium Cut Polish, Finishing Cut Polish, Ceramic Prep Polish, and Pro Ceramic Coating on All Surfaces. (Level R, Elevate, Ignition, Triple P, and Pro Marine Ceramic Coating)
This package includes everything listed in our #5 and more. In addition, this service includes the Vinyl, Trim, Glass, Exhaust, Prop and Microbial Ceramics! Once the Pro-Grade Ceramic is applied, we will then apply the Microbial Ceramic on top (on the section of your hull that will be submerged) this further increases the hydrophobic qualities of the Pro-Grade Ceramic as well as the added benefit of deterrence of any and all marine growth.
Vessel must be fully out of water
